GRE Tunnel Profile
This is a Wireshark profile specifically to help with GRE Tunnel Analysis.
These are our Wireshark Profiles in ZIP format. Import these to your Wireshark installation.
This is a Wireshark profile specifically to help with GRE Tunnel Analysis.
For those of you who are gamers, this protocol is often used. This is a Wireshark profile targeted at the GVSP part of the GigE Vision family. GigE Vision is an interface standard introduced in 2006 for high-performance industrial cameras. It provides a framework for transmitting high-speed video and related control data over Ethernet networks. …
Here is a profile for use with SMB (Server Message Block) protocol in Wireshark.  
Video over the Internet is a deep pond.ÃÂ We started a profile here and would welcome feedback, input and expansion.ÃÂ Enjoy!
In VoIP you often have gateways that use a gateway protocol like MGCP.ÃÂ This profile helps you isolate MGCP for troubleshooting
This profile enables detection of Check Point “fw monitor” output which replaces MAC addresses with information about the interface and direction. It also adds a specific coloring ruleset so each of the 4 steps a packet takes to traverse the firewall get’s it own color. This is particularly useful to do a quick scan to …
A profile specifically for Check Point Firewalls Read More »
This is just a start. Comment on needed changes.
This is a start. Please comment on what needs to be added/changed.
This is the beginnings of a standard (not Wireless) Security Profile for Wireshark. Please send me your comments and suggestions as to how we can make this better.
A special thank you to Laura Chappell for contributing this profile for her Deep Space Networking challenges for the Delay/Disruption Tolerant Networking (DTN). You can read more about about DTN on the NASA web site here: https://www.nasa.gov/directorates/heo/scan/engineering/technology/disruption_tolerant_networking and on Wikipedia: https://en.wikipedia.org/wiki/Delay-tolerant_networking In November 2007, Scott Burleigh and Keith Scott released the “Bundle” Protocol Specification in RFC 5050. The …
Deep Space Networking: a DTN profile from Laura Chappell Read More »
TFTP is designed to be a stripped-down file transfer protocol without authentication or many of the features that FTP and other protocols offer. Instead, it has two main options: file read requests and file write requests. TFTP is an insecure file transfer protocol with many more secure alternatives. If TFTP traffic exists in a network traffic …
TFTP Protocol Profile with Packet Diagram (Wireshark v3.3.0 and later) Read More »
This is a clever little customization of our Better Default Profile (details here) that you can use to redact packets! To learn more about this technique, watch our short Youtube video: Start using this Better Default profile with Packet Redaction right away and you will see, it is like the springboard for your troubleshooting …
A Better Default profile with Redaction (for v3.4.0 and later) Read More »
Most Wireshark users agree that the default profile is simply not good enough. The default should be a profile that you can start troubleshooting from. It should be a place where you can check off some important basics as you begin your evidence gathering. My “better default” with Packet Diagram profile is just that. This …
A Better Default profile with Packet Diagram (for v3.4.0 and later) Read More »
If you capture on a USB port, this USB profile will help you to focus on the USB packets. Filter Buttons to find Devices, and Configurations. Note: This is a beginning, and if you want to add features please let me know.
For those of you who love Wireshark and are supporting WLAN Wi-Fi Wireless networks, we would like to offer a great profile for WLAN/Wi-Fi that focuses on the timing issues of Wi-Fi/WLAN packets. Consider the areas you would want to start with: Timing information (Duration – NAV, Preamble, and IFS) Special Colorization based on various …